Note:





Technical Specification

Connector


CAN

D-SUB, 9 pins

USB

USB 2.0 Full-Speed, Micro USB

CAN Features



Specification

2.0A (standard format) and 2.0B (extended format), ISO 11898-2 High-speed CAN



Data Rate

From 20kbps to 1Mbps can be programmed arbitrarily.


Isolation Voltage

1.5K VDC/min, 3K VDC/1s

Microcontroller

STM32F0, 48MHz

Termination

120 Ohm resistor selectable jumper

CAN Transceiver

ISO1050DUBR ,Texas Instruments

Other

 

Work Temperature

-40°~ 85°

Relative humidity

15-90%, not condensing

PCBA Size (L * W * H)

56.50mm * 31.20mm * 14.20mm

Weight

15.5 g

Pin

Description


1

5V/150ma output .

Weld 0Ω resistor on R9 to enable this function(close to the jumper).

2

CANL bus line (dominant low)

3

CAN_GND

4

NC

5

NC

6

NC

7

CANH bus line (dominant high)

8

NC

9

NC