Page tree

Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Note:

  • Support LinuxSupport /Windows XP/7/8/10Support /Mac OS
  • Github
Address:




Panel

Table of Contents


Technical Specification

Connector


CAN

D-SUB, 9 pins

USB

USB 2.0 Full-Speed, Micro USB

CAN Features



Specification

2.0A (standard format) and 2.0B (extended format), ISO 11898-2 High-speed CAN



Data Rate

From 20kbps to 1Mbps can be programmed arbitrarily.


Isolation Voltage

1.5K VDC/min, 3K VDC/1s

Microcontroller

STM32F0, 48MHz

Termination

120 Ohm resistor selectable jumper

CAN Transceiver

ISO1050DUBR ,Texas Instruments

Other

 

Work Temperature

-40°~ 85°

Relative humidity

15-90%, not condensing

PCBA Size (L * W * H)

56.50mm * 31.20mm * 14.20mm

Weight

15.5 g

Pin

Description


1

5V/150ma output .

Weld 0Ω resistor on R9 to enable this function(close to the jumper).

2

CANL bus line (dominant low)

3

CAN_GND

4

NC

5

NC

6

NC

7

CANH bus line (dominant high)

8

NC

9

NC

Quick Start For Debian

  • Step1,Download Software 

Code Block
languagebash
linenumberstrue
sudo git clone https://github.com/INNO-MAKER/usb2can.git
cd usb2can             
chmod -R a+rwx *
ifconfig -a        #check USB2CAN status, you'll see CAN0,CAN1,CAN*... device
  • Step2,Install Python

Code Block
languagebash
linenumberstrue
#If you can not find the Python3 in system. Install the Python3
sudo apt-get install python-pip
sudo apt-get install python3 idle3 nano
#Install Python CAN library.
sudo pip3 install python-can

Full User Manual,Windows/Mac-OS Software

           https://www.jianguoyun.com/p/DVvY6VIQpdSrBxjyqKUB