Contact: / /

Skip to end of metadata
Go to start of metadata


• Array format: Wide-VGA, active 752H x 480V (360,960 pixels)

• Global shutter photodiode pixels; simultaneous integration and readout

• RGB Bayer or Monochrome: NIR enhanced performance for use with non-visible NIR illumination

• Readout modes: progressive or interlaced

• Shutter efficiency: >99%

• Simple two-wire serial interface

• Real-time exposure context switching - dual register set

• Register lock capability

• Window size: User programmable to any smaller format (QVGA, CIF, QCIF). Data rate can be maintained independent of window size

• Binning: 2 x 2 and 4 x 4 of the full resolution

• ADC: On-chip, 10-bit column-parallel (option to operate in 12-bit to 10-bit companding mode)

• Automatic controls: Auto exposure control (AEC) and auto gain control (AGC); variable regional and variable weight AEC/AGC

Support for four unique serial control register IDs to control multiple imagers on the same bus

• Data output formats: – Single sensor mode: 10-bit parallel/stand-alone 8-bit or 10-bit serial LVDS – Stereo sensor mode: Interspersed 8-bit serial LVDS

• High dynamic range (HDR) mode


• Security

• High dynamic range imaging

• Unattended surveillance

Stereo vision

• Video as input

• Machine vision

• Automation

Table 1: Key Performance

Parameters Parameter Value

Optical format 1/3-inch Active imager size 4.51mm(H) x 2.88mm(V) 5.35mm diagonal Active pixels 752H x 480V Pixel size 6.0m x 6.0m Color filter array Monochrome or color RGB Bayer Shutter type Global shutter Maximum data rate master clock 27 Mp/s 27 MHz Full resolution 752 x 480 Frame rate 60 fps (at full resolution) ADC resolution 10-bit column-parallel Responsivity 4.8 V/lux-sec (550nm) Dynamic range >55dB linear; >100dB in HDR mode Supply voltage 3.3V +0.3Vall supplies) Power consumption <160mW at maximum data rate (LVDS disabled); 120W standby power at 3.3V Operating temperature -30°C to +70°C ambient Packaging 48-pin CLCC

  • No labels
Write a comment…